MSI 890FXA-GD65 Serie Handbuch Seite 40

Enter Windows, and select [Start]->[Settings]->[Control Panel]->[Power Options].
•
Enter Power Options Properties tag, and select Minimal Power Management under
Power schemes.
▶
To enable this item to read the CPU power consumption while idle. Not all proces-
sors support Enhanced Halt state (C1E).
▶
This item is used to enable/ disable SVM.
▶ AMD Cool'n'Quiet
The Cool'n'Quiet technology can effectively and dynamically lower CPU speed and
power consumption.
Important
To ensure that Cool'n'Quiet function is activated and will be working properly, it is re-
quired to double confirm that:
• Run BIOS Setup, and select Cell Menu. Under Cell Menu, find AMD Cool'n'Quiet,
and set this item to "Enabled".
• Enter Windows, and select [Start]->[Settings]->[Control Panel]->[Power Options].
Enter Power Options Properties tag, and select Minimal Power Management under
Power schemes.
▶ C1E Support
To enable this item to read the CPU power consumption while idle. Not all processors
support Enhanced Halt state (C1E).
▶ Adjust CPU FSB Frequency (MHz)
This item allows you to select the CPU Front Side Bus clock frequency (in MHz).
▶ Adjust CPU Ratio
This item is used to adjust CPU clock multiplier (ratio). It is available only when the
processor supports this function.
▶ Adjusted CPU Frequency (MHz)
It shows the adjusted CPU frequency. Read-only.
▶ Adjust CPU-NB Ratio
This item is used to adjust CPU-NB ratio.
▶ Adjusted CPU-NB Frequency (MHz)
It shows the adjusted CPU NB frequency. Read-only.
Downloaded from www.Manualslib.com
C1E Support
SVM Support
manuals search engine
En-29