G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference. If
you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specific hazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package Contents
• Anti-Slip Pad for Smartphones
• These operating instructions
3. Safety Notes
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and
overheating, and only use it in a dry environment.
• When using this product, observe the applicable
local traffic laws and regulations.
• Keep the packaging material out of the reach of
children due to the risk of suffocation.
• Dispose of packaging material immediately
according to locally applicable regulations.
• Do not modify the product in any way. Doing so
voids the warranty.
2
4. Montage
Warning
• Take care that components such as airbags,
safety areas, controls, instruments, etc. and
visibility are not blocked or restricted.
• Do not allow yourself to be distracted by the
product, for example when driving a vehicle
or operating sports equipment. Always pay
attention to the surrounding traffic and your
environment.
• Never use the pad on or next to airbags, this
could lead to serious injuries or in case of
accidents.
Note
• Please note that the adhesive surface you
choose should be free of dust and grease. Use
a suitable cleaning agent from a specialised
dealer to clean the surface.
• Please note that car-care-products (e.g. Cockpit
sprays) can interfere with the adhesiveness
of the pad. Therefore thoroughly clean the
surface before putting on pad.
• Do not put the pad on paper, woodwork and
wall.
• Do not sprinkle any chemic cleanser on the
pad.
• We recommend to change position of pad
regularly to avoid colour differences on the
surfaces.
• Strictly avoid using undue force when using this
product or during installation.
• Check that the product is safely mounted before
beginning your journey.
• If pad is dirty, please use water and detergents
in order to clean.