Philips SBC SC368 Bedienungsanleitung Seite 5

Monitoring baby's sounds
To use the units to listen to your baby:
• Position the Baby unit at least 1 metre away from the baby so that the microphone (A-1) can pick up
baby's sounds.
• Set the channel switch to the same position on both units.
• Push the POWER switch on the baby unit (A-4) to switch it on.
• Set the SENSITIVITY control (A-5) on the Baby unit to about mid-range (5).
• The green TRANSMIT light (A-3) lights when a sound is picked up.
• Move away from the Baby unit with the Parent unit.
• Switch on the Parent unit using the Volume control/Off (B-5) and adjust the volume to the level you
prefer.
• If required, re-adjust the SENSITIVITY control (A-5) on the Baby unit to set the level at which the
microphone will start to pick up sounds.
When the SENSITIVITY control (A-5) is set to 9, the microphone picks up even the softest sounds.
Experiment with different levels until you find the setting that suits you and your baby best.
The green LINK light (B-1) lights continuously when the Parent unit and the Baby unit are in touch with
each other.
H
OW TO USE THE BABY MONITOR
4