Faulty Function; Technical Data; Waste Disposal - Heitronic 500032 Installations- Und Bedienungsanweisung

5. Installation/Commissioning

This product can only be installed by a qualified electrician.

The connection lines in the building must be disconnected before installation and secured against being
switched back on. For this, trip the corresponding fuse switch in the building installation.

Switch the building installation's fuse switch back on.

6. Faulty Function

Motion sensor does not switch on

Light switched on at the wall switch?

Check the connected lines

Sensor set correctly?


7. Technical Data

Article Port
230 V ~ AC,
500032
50 ~ 60 Hz
8. Care

Disconnect the entire product from the mains first and let it cool down before cleaning or maintaining the
product.

Clean the product regularly using only a slightly moist, soft and lint-free cloth. Pay attention to any
enclosed instructions.

9. Waste Disposal


Old electronic devices must be taken to public waste disposal sites and must not be put into general
household waste.
Adjustment of the
Motion sensor
E27-socket, max. 60W, max. 6m,
3-2000LUX, min. 10sec.-max. 5min.
2
Protection Protection
Type Class
IP 20 II
of 2 | 28.09.2018