Werbung
Verfügbare Sprachen
Verfügbare Sprachen
80360 Table stand for
80360
disinfectant dispensers
Please read these assembly instructions carefully!
TECHNICAL DATA
STAND (DISPENSER HOLDER)
- Total height:
470 mm
- Base area W x D:
225 (145) x 250 mm
- Mounting hole patterns for dispensers:
-
a. 350/500 ml:
40-51 x 169 mm
-
b. 1000 ml:
40-51 x 203 mm
- drip cup:
ø 70 x 47 mm
MATERIAL
Steel (t = 4 mm)
- Rubber pads:
Polyurethane (4 x ø 12 x 3.5 mm)
SURFACE
80360-000-55 black
80360-000-76 pure white
powder-coated
WEIGHT
3.0 kg
SAFETY INSTRUCTIONS
The safety of the stand depends on the:
GENERAL
Perform visual inspection before use:
Damaged components must not be used
- or only after a qualified repair or after
an exchange.
STAND (DISPENSER HOLDER)
Handle with care due to the heaviness, in particular,
do not drop (danger of crushing).
MOUNTING
Ensure that all screw connection are tight.
SURFACE
Only use the stand on suitable, i.e. level and
stable floors.
LOAD
Only for suitable dispenser (350/500/1000ml);
see above TECHNICAL DATA.
SURROUNDINGS
Negative external influences (knocks, dragging
around, vibrations, wind, wetness etc.) are to be
avoided or prevented.
MAINTENANCE
Clean the base regularly.
INSTALLATION INSTRUCTIONS
STAND (DISPENSER HOLDER)
1 Place the stand with the 4 rubber pads on
1
a suitable surface.
DISPENSER (not included in delivery)
2 Dispensers (various manufacturers) generally have
2
the following mounting hole patterns:
2
a. for 350/500 ml bottles:
2 a.
- 3 holes ø 5 mm
2 a.
- distance: 40 mm horizontal / 169 mm vertical
2
b. for 1000 ml bottles:
2 b.
- 3 holes á ø 5 mm
2 b.
- distance: 40 mm horizontal / 203 mm vertical
2
c. for special sizes:
2 c.
- distance: up to 51 mm horizontal / 214 mm vertical
2
NOTE - Anchors and screws supplied by the manufacturer
2
are usually only used for direct wall mounting - do not
2
use it here. Use this:
3 Fasten the dispenser back panel with:
3
- 3 x screws M5 x 15 mm (cross recess Z2)
3
- 3 x washers ø 5 mm
3
- 3 x lock nuts M5 (DIN985).
4 Mount the dispenser housing as described in the
4
manufacturer's instructions.
DISINFECTANT BOTTLE (not included in delivery)
5 Place the disinfectant bottle as indicated in the
5
Euro dispenser manufacturer's instructions.
INFORMATION
NOTE: Stand and dispenser holder are not
NOTE:
medically certified product.
- Negative effects of the disinfectant on the products
-
(surfaces, material) are not known to us.
- Nevertheless, we recommend to always remove possible
-
residues of the disinfectant in order to avoid possible
-
damage and to enjoy the product as long as possible.
- For cleaning purposes use a slightly damp cloth and
-
a non-abrasive cleaning agent.
Disinfectant is not included in the scope of delivery.
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
80360-000-55/76 Rev.4a 03-79-915-00 6/20
Werbung
