Herunterladen Inhalt Inhalt Diese Seite drucken

Inhaltsverzeichnis; Important Informations On Safety, Location And Electrical Connection - be cool BCPC75DT2002 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Technical description and delivery content
PLEASE READ THE INSTRUCTION MANUAL CAREFULLY BEFORE STARTING
ASSEMBLY, INSTALLATION, OPERATION OR MAINTENANCE. PROTECT YOURSELF
AND OTHERS BY FOLLOWING THE SAFETY INSTRUCTIONS. FAILURE TO COMPLY
WITH INSTRUCTIONS COULD RESULT IN PERSONS AND / OR PROPERTY DAMAGES
AND / OR LOSS OF THE WARRANTY CLAIM!
IMPORTANT INFORMATION ON SAFETY, LOCATION AND ELECTRICAL
CONNECTION.
1.
Please read all instructions carefully before using
device.
2.
Use this device only in accordance with the
guidelines in the operating instructions. Any other use that is not recommended by the
manufacturer could result in fire, electric shock, or personal injury.
3.
It is forbidden to adapt or modify the properties of this device in any way and only use spare
parts and accessories recommended by the manufacturer (failure to do so will invalidate the
guarantee and warranty).
4.
For any repairs to the device, the mains plug or the cable, always and exclusively contact
customer service points authorized by the manufacturer. You can access the customer service
centers online at www.becool.at.
5. Remove the packaging and make sure that the party cooler is not damaged. If in doubt, do not
use the party cooler and contact the service center or your dealer.
6. Keep children away from packaging material. If swallowed there is a risk of suffocation!
7. If the power supply cable is damaged, it must be replaced by the manufacturer or an authorized
service center in order to avoid all possible risks.
8. The device must be installed in accordance with local installation and operating regulations for
electrical systems.
9. The electrical socket in which you connect the device must not be defective or loose and must
be suitable for the required current load and, above all, must be reliably grounded. If in doubt,
have your electrical installation checked by a qualified electrician.
10. Before connecting to the mains, you must check whether the type of current and the mains
voltage match the information on the device nameplate on the back.
11. Avoid using an extension cord as this could overheat and cause a fire.
12. Do not twist or bend the power cord.
Table of contents
Seite 11 von 19
11 - 13
14
5
15 - 16
17
17
18
18
19
the

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis