GAME Rocker MH-F-10 Originalbetriebsanleitung Seite 21

GB
Assembly
9
Use a hex wrench to adjust the height tension
of the gas spring arm, to keep different weight
of monitors still at any position.
Be sure to keep the arm in horizontal position
during adjustment. Or else, it would be diffi-
cult to adjust the mount.
NOTE: If the monitor is automatical-
ly sagged after it is installed, adjust
the force value to "+"; if the monitor
is installed, it will automatically go
up, and adjust to "-" to decrease the
force value.
21
8
A
S=5mm