General Information - Weidmuller AM16 Bedienungsanleitung

9.2 Turn the cap a quarter of a turn to undo and remove.
Remove spring, blade and washer.
Replace blade and re-assemble in reverse order.
9.3
Close cap by turning a quarter of a turn.
Observe markings.
9.4 Caution:
Insert the flattened end of the blade into the slot of the
drive pin.
Protect yourself from live parts
Do not work on live parts.
Cover and guard live parts near your workplace.
Application
Only use the tool for the applications described in the operating
instructions.
Do not use the tool and accessories for any work that requires
heavier-duty tools.
Do not use tools for purposes or work for which they are not
intended.
Using the tool for any other purpose may cause accidents resulting
in severe personal injury or irreparable damage to the tool or items
of value.
General information
For your own safety, only use the accessories and attachments
recommended in the operating instructions or by the manufacturer.
Please observe the accident prevention regulations that are
applicable to you.
The tool must be inspected for proper operation on a regular basis
in line with the frequency of use and type of service. If appropriate
inspections are not possible at the place of use, these may be
conducted by the manufacturer.
Repairs must only be performed by qualified personnel in order to
avoid operator accidents.