AirPatrol SmartHeat RoomUnit Bedienungsanleitung Seite 8

PAIRING WITH CONTROLUNIT
After installing SmartHeat ControlUnit you are ready to pair
RoomUnits to the system.
3. Press the PAIR button on RoomUnit. RoomUnit display
will indicate pairing mode. Now ControlUnit enters into
actuator selection mode. Pairing LED starts blinking
green on ControlUnit.
8
Downloaded from www.Manualslib.com manuals search engine
1. Remove small paper
between batteries.
2. Put ControlUnit
into Pairing mode
by pressing PAIR
button (Pairing
LED will turn
green)