Troubleshooting; Specifications - Walimex Pro BOYA BY-M1pro Gebrauchsanleitung

11. Troubleshooting

Problem
The microphone does not
turn on
The battery discharges too
quickly
Too much ambient noise is
being picked up
27
Solution
The battery may be incorrectly
oriented in the battery com-
partment. Open the battery
compartment and make sure
the battery is correctly
installed.
The battery may be exhaus-
ted. Replace it with a new
one. See the „Specifi cations"
section for compatible re-
placements.
The battery terminals are dir-
ty. Open the battery compart-
ment and clean the terminals
with a cotton swab.
The microphone is being left
on. Turn o¬ff the microphone
by switching to „OFF" to save
battery when the recording
is finished.
You are using the microphone
in extremely hot or cold condi-
tions which drains it quickly.
When there is too much
background noise, switch to
-10dB to reduce unwanted
background noise.
12. Specifications
Transducer
Polar pattern
Frequency range
Signal/Noise
Sensitivity -30 dB +/- 3 dB / 0 dB=1V/Pa, 1 kHz
Output impedance
Battery type
(compatible with LR44, 357, and SR44)
Connector
Pad Switch
Cable length
Weight
Electret condenser
Omnidirectional
65 Hz ~ 18 KHz
78 dB SPL
1000 Ohm or less
LR44 included
3.5mm (1/8") 4-pole gold plug
0/-10dB
6,0m
58g
28