Daily Maintenance; Filter Replacement - Philips AWP3703/10 Benutzerhandbuch

Notes
For the first time use, select the unfiltered mode and let the water run for 5 seconds.
Then switch to the filtered mode and let the water water run through the filter for 3 minutes.
Daily usage
AWP3703, AWP3753:
Press the PUSH button to switch between filtered and unfiltered mode.
- Unfiltered shower mode
Press the PUSH button to select the
- Filtered stream mode
Press the PUSH button again to select the
AWP3704, AWP3754:
Turn the lever to switch among the filtered stream, unfiltered shower and unfiltered
stream mode.
Always use cold water (5-38℃) for the filtered mode. Otherwise the filter will be
damaged.
2. Maintenance

Daily maintenance

- For everyday usage: extract unfiltered water for 5 seconds before switching to
prevent filter from being clogged, and extract filtered water for 5 seconds before usage.
- If it hasn't been used for more than 2 days, extract the filtered water for 20 seconds
before usage.
- If it hasn't been used for more than 2 weeks, extract the filtered water for 3 minutes
before usage. If there is odor found in the filtered water, please change the filter cartridge.

Filter replacement

When to replace:
Based on the daily usage assumption, the filter should be replaced:
· every 5-6 months for 1 person
· every 2-3 months for 2 persons
· every 1-2 months for 3 persons
mode
mode.
3
to