Ebode IPV68P2P Schnellstartanleitung Seite 13

By DDNS: if you want to access your camera by a computer: If you want to access your

camera by a computers web browser outside of your LAN, you need to configure following
configurations.
1. Choose "Settings" on the top of the camera web page, then go to the "Network > IP
Configuration" section on the left side of the screen, then uncheck the Obtain IP DHCP.
Note: For Belgian users, please download the document "Telenet Modem Instructions" from
the CD or from our ebode electronics website.
2. Enable UPnP and DDNS in the camera's settings page.
3. We recommend you to use the Manufactures DDNS by factory default, but if you want
to use the third party DDNS, please check the user manual for further instructions.
12-11-2015
Select Yes and click Save.
- 13 -
IP Address: Set this in the same subnet
as your computer , or keep it as default.
Subnet Mask: Keep it as default.
Gateway and DNS Server: Set it to the
IP address of your router.
ebode IPV68P2P