Maintenance And Cleaning; Technical Specifications - HomeMatic IP HMIP-DS55 Bedienungsanleitung

Maintenance and cleaning

Make sure that "TOP" and the arrows on the back
side of the device point upwards and that the
latches (A) snap into the openings on the device.
Please refer to the operating manual of the in-
serted device for further information on integra-
tion into the Homematic IP system.
Never recharge standard batteries. Do not throw
the batteries into a fire. Do not expose batteries to
excessive heat. Do not short-circuit batteries. Do-
ing so will present a risk of explosion.
Used batteries should not be disposed of with
regular domestic waste! Instead, take them to
your local battery disposal point.
7 Maintenance and cleaning
The product does not require you to carry out
any maintenance. Enlist the help of an expert to
carry out any maintenance or repairs.
Clean the product using a soft, lint-free cloth that is clean
and dry. You may dampen the cloth a little with lukewarm
water in order to remove more stubborn marks. Do not
use any detergents containing solvents, as they could
corrode the plastic housing and label.
20
Downloaded from www.Manualslib.com manuals search engine
8

Technical specifications

Device short description:
Supply voltage:
Degree of protection:
Ambient temperature:
Dimensions (W x H x D):
Weight:
Subject to technical changes.
Instructions for disposal
Do not dispose of the device with regular domes-
tic waste! Electronic equipment must be dis-
posed of at local collection points for waste elec-
tronic equipment in compliance with the Waste
Electrical and Electronic Equipment Directive.
Information about conformity
The CE sign is a free trading sign addressed ex-
clusively to the authorities and does not include
any warranty of any properties.
For technical support, please contact your
retailer.
Technical specifications
HMIP-DS55
2x 1.5 V LR6/mignon/AA
IP20
0 to 50 °C
90 x 79 x 67 mm
145 g (incl. batteries)
21