GPO BROOKLYN Bedienungsanleitung Seite 7

When the unit is on standby, a 24 hour LED clock will be displayed for
10 seconds if you press the menu button on the front of the unit.
The time can be set on the clock whilst the unit remains in standby
mode:
1. Press and hold the central part of the Search Knob on the front of
2. The hour value on the clock will be highlighted
3. Change the hour by turning the central part of the Search Knob
4. Press search again to accept the hour and highlight the minute value
5. Change the minute by turning the Search Knob clockwise or anti-
6. Press the Search Knob a final time to confirm the time
GPO_Brooklyn_Manual EU - Dec 2017_v2.indd 7
Downloaded from www.Manualslib.com
Se t ting t he LE D cl oc k
the unit for two seconds
clockwise to move the hour forwards or anti-clockwise to move the
hour backwards
clockwise
manuals search engine
7
30/11/2017 14:50