GPO BROOKLYN Bedienungsanleitung Seite 11

Ta p e
1. Turn the unit on using the Power Button
2. Press Eject on the tape control panel to open the cassette tape slot
3. Insert a cassette tape into the cassette tape slot on the front of the
4. Close the slot
5. Turn the Function Knob to Tape
6. The Tape LED light will be illuminated and the timer clock will begin
7. This counter can be reset at any point using the reset button next to
8. Use the play, tracking and stop buttons on the unit to play the
9. The cassette auto stop will ensure the tape stops at the end of each
10. Press play again to resume playback
11. To remove the cassette, press Stop/Eject once to stop playback
12. While using any of the unit's other modes, you can press the record
GPO_Brooklyn_Manual EU - Dec 2017_v2.indd 11
Downloaded from www.Manualslib.com
unit
counting up from zero
the timer clock
cassette
side. At this point, eject the tape, remove it, turn it around and re-
insert it
and a second time to eject the tape
and play buttons together to record music to a blank cassette tape
manuals search engine
11
30/11/2017 14:50