Replacing The Battery - Voltmaster IRT 1 Bedienungsanleitung

Replacing the battery

If the instrument is not used for a longer period of time, remove the batteries
and keep the instrument in an environment that is not moist or too hot.
Do not leave any used batteries in the measurement instrument, because
even batteries protected against discharge can corrode and, thus, release
chemicals that could damage your health and destroy the instrument.
Procedure
| If the operating voltage of the battery is insufficient,
the battery symbol appears on the LCD display;
the battery must then be replaced.
| For operation, the Voltmaster
2 × Micro, LR03, AAA or similar types.
| Open the battery compartment by folding away the
battery compartment cover from the handle.
| Replace the batteries of the similar type, pay
attention to the polarity, fold down the battery
compartment cover on the handle.
Batteries must not be disposed of with normal domestic waste.
There will be a collection point near you!
®
IRT 1 requires
Open the battery
compartment
23