Specific Safety Rules - Status Sp300 Originalanweisungen

2. SPECIFIC SAFETY RULES

SPECIFIC SAFETY RULES
EXPLOSION OR FIRE
Solvent and paint fumes can explode or ignite. Severe injury or
property damage can occur.
PREVENTION:
• Provide extensive exhaust and fresh air introduction to keep the air within the
spray area free from accumulation of flammable vapors.
• Avoid all ignition sources such as static electric sparks, open flames, pilot lights,
electrical appliances, and hot objects. Connecting or disconnecting power cords
or working light switches can make sparks.
• D o not smoke in spray area.
• Fire extinguisher must be present and in good working order.
• Use only outdoors in a well-ventilated area. Flammable vapors are often heavier
than air. The turbine contains arcing parts that emit sparks and can ignite vapors.
• Follow the material and solvent manufacturer's warnings and instructions.
• Do not use materials with a flashpoint below 70°F (21°C).
Flashpoint is the temperature that a fluid can produce enough vapors to ignite
(see coating supplier).
• Plastic can cause static sparks. Never hang plastic to enclose the spray area.
Do not use plastic drop cloths when spraying flammable materials.
HAZARD: EXPLOSION HAZARD DUE TO INCOMPATIBLE
MATERIALS.
Will cause property damage or severe injury.
PREVENTION:
• Do not use materials containing bleach or chlorine.
• Do not use halogenated hydrocarbon solvents such as bleach, mildewcide,
methylene chloride and 1,1,1--trichloroethane. They are not compatible with
aluminum.
• Contact your coating supplier about the compatibility of material with aluminum.
HAZARD: HAZARDOUS VAPORS
Paints, solvents, insecticides, and other materials can be
harmful if inhaled or come in contact with the body.
Vapors can cause severe nausea, fainting, or poisoning.
PREVENTION:
• Use a respirator or mask if vapors can be inhaled. Read all instructions supplied
with the mask to be sure it will provide the necessary protection.
EN
8
2. SPECIFIC SAFETY RULES
• Wear protective eyewear.
• Wear protective clothing as required by coating manufacturer.
HAZARD: GENERAL
Can cause severe injury or property damage.
PREVENTION:
• Read all instructions and safety precautions before operating equipment.
• Follow all appropriate local, state, and national codes governing ventilation,
fire prevention, and operation.
• Use only manufacturer authorized parts. User assumes all risks and liabilities
when using parts that do not meet the minimum specifications and safety
devices of the turbine manufacturer.
• Do not spray outdoors on windy days.
• Wear protective clothing to keep paint off skin and hair.
• Never aim spray gun at any part of the body.
Household use only. Intended for outdoor use ONLY with materials having
flashpoint above 70°F (21°C).
9
EN