Error Messages; Warranty - Medipool Poolscan Bedienungsanleitung

No.
01
03
20
21
22
• Maintenance
1. Keep the instrument in a clean condition.
2. No solvent, abrasive materials or brushes
3. Dry the instrument when not in use, store under
4. Remove battery if instrument is being stored for
• Trouble shooting
1. Use only blister tablets with black printing.
2. Do not touch the tablets. This can cause
3. Close the blue lid on top of the sample chamber tightly
4. Always ensure that the sample chamber, the lid

Warranty

The waterproof PoolScan is warranted to be free from
manufacturing defects for two years.
Downloaded from www.Manualslib.com

Error messages

Meaning and possible causes
Insufficient light at ZERO. Poss. cause: Duct contami-
nated or light path blocked; sample strongly coloured?
Division by 0. Poss. cause: Duct contaminated or light
path blocked; sample strongly coloured?
Too much light at detector. Poss. cause: Cap not
applied; measurement in bright sunlight
Too much light at detector. Poss. cause: Cap not
applied; measurement in bright sunlight
LowBat occurred during measurement. Change
battery, clean contacts
should be used to clean the instrument. Clean
the sample chamber using a soft tissue.
ambient environmental conditions.
an extended period.
contamination and give pour results.
before zeroing/reading.
and the stirring rod are thoroughly rinsed when
changing from one test to the other.
manuals search engine
GB
5