Technical Specifications; Installation - Saunia 46303 Montage- Und Betriebsanleitung

GB
INSTALLATION AND OPERATION GUIDE
ART.NR: 46303
SAUNIA LED-THERMOMETER

TECHNICAL SPECIFICATIONS

TRANSFORMER
Model: GOOBAY SET 12-15 LED
Input AC 200-240V, 50 Hz
Output DC 12V clamp, I out DC 1.25A
max 15W, Protection class II
1 = LED BOARD
2 = TRANSFORMER
3 = MOUNTING WOOD SCREWS
INTENDED USE
The LED thermometer is intended for measuring of temperature (art. 46303) or measuring both
temperature and humidity (art.46304)in a sauna room. LED lights give a beautiful colour to the
thermometer and make your sauna to look stylish.
ELECTRICAL SAFETY
Operating voltage 12V DC. Connection to the mains electricity should only be performed by a
qualified specialist-electrician The transformer is intended for use in dry premises only. In case
the cable is damaged, the LED thermometer should be replaced.
Attention! The LED lamp is equipped with heat resistant silicone cables. Pay special care to their

installation.

INSTALLATION
For good results, plan thoroughly all installation activities. Make sure that the cable length is
sufficient for connection. Pay special care to installation of the product.
Downloaded from www.Manualslib.com manuals search engine
ART.NR: 46304
SAUNIA LED-THERMO+HYGROMETER
LED
TYPE 5050 Smd WW
1,44 WATTS, 0,12A
IP 65, 6 led 90 lumen