Start Setup - sricam SP017 Kurzanleitung

English

Start setup

Step1. Product Connection
WAN LAN
Step1-1: Power the IP Camera
RESET
Step1-2: Connect the camera to the network.
(Connect the camera to a Router or Switch with a RJ-45 Ethernet cable.)
Step1-3: Reset to default setting (After power on the camera,
then keep pressing the RESET button using a Reset Pin , until
1069813
you hear a clash sound from the camera. The Reset Button of SP020 is
next to USB Port)
Step2. Sricam APP Installation
: Scan the QR code to download the"Sricam" App.
Search"Sricam"on Google Play or iOS App Store
-2-
Downloaded from www.Manualslib.com manuals search engine