Gigahertz Solutions FF10 Bedienungsanleitung Seite 9

FF10
HF35C, HF38B, and HFE35C only:
How to Mount the Battery Housing
The external battery box is furnished with an adhesive foil on its
back. Please remove the protective foil as well as the little sili-
cone loop for the protection of the battery contacts. Before ad-
hering the battery container make sure to remove the bat-
tery!
Then you can adhere the box onto
the back side of the filter. Please
make sure the battery contacts
at the bottom right of the battery
box are correctly connected.
Carefully "thread" the contacts
in order to make sure they don't
slip in between the housing and
the receptacle.
An even surface helps aligning the
arrangement.
The adhesive foil is made of a
high quality cliché band designed
for multiple use.
In order to open the battery box,
please press firmly from above,
and open the lid.
7
© Gigahertz Solutions GmbH
Downloaded from www.Manualslib.com manuals search engine