LevelOne NVR-0104 Schnellinstallationsanleitung Seite 5

Double-click on an NVR and the search program should automatically access the
NVR's web administration page from your default browser
You should be prompted for the NVR's username and password. Enter its default
username "root" and password "root" and then click "OK" to enter the system
Access the NVR with its default IP address
The NVR comes with a pre-configured static IP "192.168.101.50". However, it is only
used when there is no DHCP server presented in the network. The NVR will turn on
its DHCP server function and act as the DHCP server in the network.
To connect to the NVR, connect the PC directly to the NVR using a crossover CAT5
Ethernet cable. Simply access the NVR from your web browser with its IP address
Downloaded from www.Manualslib.com
Quick Installation Guide
manuals search engine
Again, you should be prompted for the
username and password. Enter its default
username "root" and password "root" and
then click"OK" to enter the system
Page 5
Double-click