Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation/ safety precautions, continued
• BL-210 has to be mounted in an additional housing to fulfill the double
isolation requirement related to the connection wires. Otherwise, only
a single isolation is realized by the single wire isolation.
• This device has not to be used in places where children might have
access to.
Initial operation
Connect the BL-210 to the 230V AC power supply voltage according to the
connection scheme. Take care of the safety instructions and precautions
as described above.
Explanation of label symbols:
Electronic product, not to be disposed as domestic waste
Device fulfills requirements of the relevant EG directives
Alternating current input
Device fulfills the requirements of the RoHS directive
Device is compliant to the EnOcean standard
Functional description
EnOcean-Repeater, Level 1 or Level 2, selectable.
The BL-210 has a service button to select / toggle between the two
possible repeater modes (Level 1 / Level 2). The selected repeater mode
is shown by the red service LED:
Push service button <= 1 sec.:
• 1x blink: Level 1
• 2x blink: Level 2
Page 5
EU Declaration of Conformity
Hereby the DEUTA Controls GmbH declares that the radio equipment
type BL-210-00-868 UP ENOCEAN REPEATER is compliant with the
directive 2014/53/EU. You can download the complete EU Declaration of
Conformity as a pdf-document on our homepage www.deuta-
controls.de in the area Service/Downloads (Doc. EUDC2020_154).
Page 7
Page 6
Page 8
Werbung
