Video Length - lidl Cr 5 a2 Bedienungsanleitung Und Sicherheitshinweise

If you now press the MENU button in video standby, the following menu opens:
Motion detection
Using the ▲▼ buttons / you can move the selection bar to the desired entry
and then call up this menu item with the / button . To exit the activated menu
item without making a change, press the MODE button . Below right, the
current menu board as well as the total number of menu boards is shown . If the
lowest menu item on a menu board is selected which leads to a further menu board,
press the ▼ button to jump to the first entry on the following menu board . To close
the menu, press the MENU button .
resolution
If you access this menu option, you can then set the the video resolution:
"1920 x 1080P (HD)", "1280 x 720P" and "640 x 480P" are the options available .
Use the ▲▼ buttons / to select the desired resolution and confirm your selection
with the / button to return to the list of menu items .
exposure
If you access this menu option, you can then adjust the video exposure in three steps
upwards (from +1 to +3, brighter), or downwards (from –1 to –3, darker) . When the
setting is set to "0" there is no exposure compensation . Use the ▲▼ buttons / to
select the desired video exposure compensation and confirm your selection with the
/ button to return to the list of menu items .

Video length

If you access this menu option, you can then set the length of the loop for the video
recording: "3 Min", "5 Min", "10 Min" or "Loop recording off" are the available
options . Use the ▲▼ buttons / to select the desired value for the loop recording
and confirm your selection with the / button to return to the list of menu
items .
Remember that the microSD card used must have a sufficient capacity to record the
desired length of loop in the video resolution set . If you select "Loop recording off"
the recording ends when you reach the capacity of the microSD card . When the end
of the recording is reached, the device will start a new recording with the length set .
If the capacity of the memory card is not sufficient for the set duration, the recording
will be aborted . Reduce the length of the loop recording or use a memory card with
a greater capacity .
CR 5 A2 GB │ IE │ 15 ■
Downloaded from www.Manualslib.com manuals search engine