Usb Operation; Tape Operation - Roadstar HIF-1899TUMPK Bedienungsanleitung

CD-MP3 OPERATION
1. Press the [CD] button (9);
2. Press [OPEN/CLOSE] (18) to
label up in the CD compartment.
3. Close the
automatically from the first track.
PROGRAMMING
Up to 99 tacks (MP3, 20 in CD) can be programmed and play in any order.
1. Stop the playback by pressing [STOP] (14);
2. Press [PLAY MODE] (17), the display (6) will show "P01" and flash;
3. Select desired track by using
4. Press [PLAY MODE] (17) again to confirm desired track into the program
memory;
5. Repeat step 3 and 4 to enter additional tracks into the program memory.
6. When all the desired tracks have been programmed, press [PLAY] (13) to play
the disc in the order you have programmed.
Note: Press [STOP] (14) twice to terminate programmed play.

USB OPERATION

1. Press the [CD/USB] button (9);
2. Plug an USB stick into the [USB PORT] (1);
3. Press the [FUNCTION] button (4) to select USB mode;
4. Playback will start automatically from the first track.
PROGRAMMING
The PROGRAMMING operation is the same as that of CD-MP3.
Notes:
Some mp3 player may not be able to play via the usb socket. this is not a maul-
•
function of the system.
To avoid damage to USB memory, remove it only when the radio is turned off.
•
The USB port is not designed for charging smartphones or other devices.
•

TAPE OPERATION

1. Press the [TAPE] source button (10);
2. Insert a cassette TAPE into the [CASETTE MECHANISM] (22);
3. The system will start playback automatically;
Press [TAPE FORWARD/EJECT] button (21) half way during playback to start ra-
•
pid tape winding in forward direction.
Slightly press the [TAPE FORWARD/EJECT] button (21) again to resume
•
playback.
Press the [TAPE FORWARD/EJECT] button (21) completely inwards and the cas-
•
sette tape will be ejected.
Downloaded from www.Manualslib.com
[CD DOOR] (12). Focus search is performed and playback will start
[SKIP
manuals search engine
open the [CD DOOR]
-/+] buttons (15/16);
English
(12) and place a CD with the
4