Before Installation - QNect QN-IPC03 Kurzanleitung

Wi-Fi Outdoor rechargeable camera
Quick setup manual
Description
1.
Lens
2.
LED
3.
IR
4.
PIR
5.
ON/OFF switch

Before installation

Please charge the device before using it. Screw the waterproof shell off.
Connect the camera to the included USB cable and the power supply unit. Plug the power
supply unit into a socket. Leave the camera until fully charged (this will take app. 4 hours)
Use
1.
Just download the app
store
2.
Start the app
3.
If you're using it for the first time, you'll have to register and create a new account.
If you already have an account, log in using your login details.
4.
Click "+" in the upper-right corner in the app, and in the list select
'Security > QN-IPC03'
Optional : Insert a memory card into the memory card slot.
5.
Turn the camera ON. Wait a moment until the camera LED begins to flash blue.
‐ If the status indicator does not flash : Press and hold the reset button for 6
seconds.
‐ If the status indicator flashes: Confirm in the app.
6.
Confirm that the camera LED is flashing.
7.
Now enter the name of your 2.4GHz WiFi network and the password, and confirm.
8.
Tap Continue and a QR-code will appear. Hold your phone with a 15 – 20 cm
distance in front of the camera.
9.
The camera will now be connected. Once the connection has been established, the
LED stops flashing and emits a constant blue light.
10.
Now you can set up, control and configure your WiFi camera using the app.
Note: The device name will also be used for push notifications.
11.
Install the device on your desired location.
6.
7.
8.
9.
10.
"qnect home" from the Apple app store or the Google Play
Microphone
Micro USB port
Reset
Micro-SD card slot [32Gb]
Metal support