Hazet-Werk 6391 Serie Betriebsanleitung Seite 20

Downloaded from www.Manualslib.com
GB
4. Storage
The tool has be stored according
the following conditions:
• Keep tool in a dry and dust-free place.
• Do not expose the tool to liquids or aggressive
substances.
• Do not store the tool outdoors.
• Keep tool out of reach of unauthorized persons.
• Storage temperature: -10°C to +40°C
• Relative air humidity: max. 60%
5. Dangers Emanating from
the Tool
Before each use, check HAZET tools for full
functional efficiency. Do not use the tool if its func-
tional efficiency cannot be ensured or if damage is
detected. If the tool is used, when it is not in full
working order, you risk severe injuries to persons
and damage to property. Defective tools may cause
severe injury.
In order to avoid injury or damage, it is essential
that the following fundamental safety guidelines will
be observed:
• Always account for tools being used.
• Observe prescribed tightening torque values
(follow manufacturer's instructions).
• Repair work must be carried out exclu sively
by authorized persons.
• Only use the tool within the prescribed plac-
es, and governed under the current regulations
relating to the working environment.
• Stand safely!
• For safety reasons any modification of HAZET
tools is strictly forbidden. Any modification of
this tool will result in immediate exclusion from
warranty and liability.
20
manuals search engine
BA 6300 6spr VIII.indd 20 BA 6300 6spr VIII.indd 20
For Your Safety
USA
1
1
6
1
6
6
1
6
6
1
6
6
2
•
08.03.12 16:37 08.03.12 16:37