Safety References - Movietech Sprinter Bedienungsanleitung

S
PRINTER

Safety references!

Please consider the following references before the assembling and the use of the
SPRINTER:
Instruction Manual: MovieTech SPRINTER
Downloaded from www.Manualslib.com
Always relieve the car while changing a tire.
Pay attention to the maximum loading. The air wheels can burst due to a too
high pressure.
The SPRINTER may be used only on stable and even underground.
Please always adjust speed. An extreme caution applies to curve journeys.
The sprinter must be so protected at inclined planes that he does not come in
rolling.
Caution with possible bruises during the construction and the handling. For
example when lifting the front axle up!
A sufficiently large safe distance has to be kept to overhead cables (high
voltage). At a unknown tension a minimum distance of 5m (16.4 ft) has to be
kept.
The maximally permissible wind velocity hast to be considered.
During the construction process and for the operation of the jib-arm always
pay attention to the correct weight compensation exactly.
Track systems are to be shifted without downward gradients. The tracks have
to be levelled out so that no side inclination arises.
No movement before the parts (e.g. camera) are secured.
Avoid contact with the wheels during the locomotion.
The complete driving area must be free of obstacles at all cost.
Consider safety-relevant the local conditions.
Do not leave the dolly unsupervised. Secure against unauthorized use.
Bedienung nur durch geschultes und qualifiziertes Personal.
Driving mistakes can leave to the possibility of knocking against obstacles or
persons. The desired camera focusing is to be rehearsed therefore sufficiently.
Do not exceed the maximum loading of 300 kg (661.39 lb).
Avoid jerky movements primarily by using the jib-arm.
manuals search engine
Page 4 of 18