Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TO EMPTY
1. Once the child has been removed from the Inflatable Bath Tub, reach into the water, and
open the drain valve on the floor of the Inflatable Bath Tub. The water will drain out through
the bottom of the unit. Remove any items from recesses.
2. Once all the water has drained through the drain valve, carefully lift the suction cup from
the bottom of the larger tub. Be sure to pull the suction cup up from the edge that contacts
the tub floor. Pulling the suction cup up by the Inflatable Bath Tub itself may tear the suction
cup from the unit, causing permanent damage to the Inflatable Bath Tub.
3. Shake and excess water from the Inflatable Bath Tub and store.
To Store: Inflatable Bath Tub suctions conveniently to the wall of your shower or tub stall.
As an added convenience, you do not have to deflate the unit to store it. Remove any items
from the recesses, shake excess water then simply find the suction cup underneath the
head of the Inflatable Bath Tub and moisten it. Press the suction cup onto the bathroom wall
to form a seal, thereby holding the Inflatable Bath Tub in place.
DEFLATION
Rapid Inflation Valve
Open the black valve cover and push on the middle button. The
PUSH
air will start to escape very quickly. To speed up the process,
gently guide the air out by flattening the Inflatable Bath Tub with
your hands.
squeeze
Floor Compartment Valve
Open the valve cover. Help guide the air out by flattening the
floor compartment towards the valve with one hand, and with
the other hand, squeeze the valve slightly at the base to allow
the air to escape.
TO CLEAN
Sponge clean with a warm, mild soap solution and clear water rinse. DO NOT USE DETER-
GENT OR BLEACH.
ADDITIONAL NOTEs
Avoid contact with sharp or hot objects. Never drag or place inflatable on abrasive surface.
Remember, cold temperatures may cause an inflatable to become limp. If this happens, add
more air to restore the Inflatable Bath Tub to a rigid shape. Warm temperatures may cause
an inflatable to over inflate. Just release some air to avoid damaging seals. The Inflatable
Bath Tub is manufactured of heavy-duty PVC welded at all joints to provide secure seals.
With ordinary usage, Inflatable Bath Tub will remain inflated for long periods of time.
RETURNS & EXCHANGES
For warranty and replacement issues, please go to www.theshrunks.com/warranty for
more information.
Head Office
5675 Goring Street Burnaby, BC
Canada V5B 0A3
T. 604-298-0588 F. 1-866-839-1624
Toll Free 1-866-354-2237
Email: info@theshrunks.com
Website: www.theshrunks.com
UsA Logistics
European Logistics
925 Boblett Street
Verbreepark 3
Blaine, WA, 98230
2731 BR Benthuizen
USA
The Netherlands
Toll Free 1.866.354.2237
T +385.99.8468449
Fax 1.866.839.1624
F 1.866.354.2237
Werbung
