Intercept A Call From Panel To Apartment (In Day Mode); Intercept A Call From Panel To Apartment (In Automatic Mode) - Fermax ADS Handbuch

Intercept a call from panel to apartment (in DAY mode)

* The call generated from an outdoor panel to
ó3
an apartment will not be received in it but it
will be intercepted by the guard unit. The
ó3
indicator attached to the button of the panel where the call has been
produced will flash shortly.
* The data of the call are shown in the SECTION D of the display.
Example: call from panel nº 1 to apartment 135.
* To answer the call, pick-up the handset and
press the key with the flashing indicator. The
display will show the communication
between guard and panel then.
In this example, it is guard with panel 1.
The guard can release the lock by pressing the
apartment or simply contact the apartment for asking.

Intercept a call from panel to apartment (in AUTOMATIC mode)

* The call from the outdoor panel to an
ó3
apartment rings in the guard unit as well.
* The data of the call are shown in the SEC-
ó3
TION D of the display.
Example: call from panel nº 1 to the apartment 135.
* The guard can attend the call. To do it, pick-
up the handset and press the button with
the flashing indicator. The display will
indicate the communication between guard and panel.
In this example, guard with panel n º1.
* Once the call has been taken from the guard
unit, it will not be available for the apartment.
In the same way, if the call has been firstly
answered from the apartment the guard unit
will not be able to capture it and the "bips" will stop beeping. Nevertheless,
the display will keep on showing the information about the call in progress
until it finishes.
In the example, it is apartment 135 contacted with panel nº 1.
The guard can release the lock by pressing the
apartment or simply contact the apartment for asking.
1/[135
[Po/ 1]
key, transfer the call to an
1/[135
[Po/ 1]
[ 135/ 1]
key, transfer the call to another
Pag 31