Fermax ADS Handbuch Seite 27

SECTION C
As shown before, the guard unit has 3 STACKS where it stores different type of calls:
calls from telephone or panel. This SECTION C provides information about the AC-
TIVE STACK at any time (see note below).
The messages shown in this SECTION C are the following:
The ACTIVE STACK is the one from PANEL 1: the guard unit is ready to
1
attend a call that was generated from PANEL 1.
In the SECTION D is shown the information regarding that call.
2
The ACTIVE STACK is the one from PANEL 2: the guard unit is ready to
attend a call from PANEL 2.
In the SECTION D is shown the information about that call.
: nn/tt
The ACTIVE STACK is the one from telephones.
It is possible to select & attend the calls stored in this STACK in any order,
since "nn" corresponds with the number of call and "tt" indicates the whole
amount of calls. In the SECTION D is offered further information about this
calls.
Example:
: 03/07 would indicate that there are 7 calls from telephone stored in the
STACK of telephones. The call selected from them is the 3
and its data associated is shown in SECTION D, this is to say: it is the
ACTIVE CALL.
The "telephone" symbol without any other indication simply means that the
STACK of telephones is selected, even if there is no unsettled call.
Once the STACK of telephones is selected, the "ARROW" button may be
used to select the ACTIVE CALL.
Notes:
We call A A A A A CTIVE ST CTIVE STA A A A A CK CTIVE ST CTIVE ST
CTIVE ST
We call A A A A A CTIVE CALL CTIVE CALL CTIVE CALL
CTIVE CALL CTIVE CALL to the one selected with the "ARROW" key from the ones in the
STACK of telephones. See page 24.
Pag 28
CK CK to the one selected with the "A" key. CK
CK
one received
rd