Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting - Clatronic CTV 805 Bedienungsanleitung

Lcd-fernseher/dvd-player mit dvb-t receiver
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Troubleshooting

Before sending the machine to the Customer Services, use the following table to check whether you can rectify the fault yourself.
Fault
Possible cause
The power supply light
No power supply
does not light
no power supply/ mains switch
switched off
No image displayed on
During operation with a television
screen
set:
Video cable not correctly connected
no DVD/CD inserted
DVD/CD not compatible
DVD/CD incorrectly placed in
CD/DVD-tray
CD/DVD is dirty
CD/DVD is damaged
Incorrect settings
The child protection system is
activated
The AV IN/OUT switch is not
correctly adjusted
No response when
Power supply problem or static
pressing button
charging of appliance
No sound
During operation with a television
set:
Audio cable not connected
Volume turned to low
Headphones not correctly inserted
Amplifi er switched off
Incorrect settings
DVD with DTS sound playback
The remote control does
Wrong direction
not work
Too far away
Batterie empty
Titles are played in wrong
Playlist is used
order
66
Solution
WARNING:
Before searching for the fault, please turn the device off
During battery operation: check whether the battery has clicked
into place
During mains adapter operation: Put the mains plug in
correctly, if necessary, check the socket is working with another
appliance
Switch the player on by the mains switch (Fig. 1/1)
WARNING:
Before searching for the fault, please turn the device off
Check the correct fi t of the Video cable. Make sure that the jacks
are tightly in the sockets
Insert a CD/DVD
Use only compatible media
Turn the CD/DVD around
Clean the CD/DVD around
Use a different CD/DVD
Check the settings of your DVD-Player
Deactivate the child protection
Please switch over
Switch off the main switch and pull out the mains plug. Insert the
mains plug into the socket and switch the player on again
WARNING:
Before searching for the fault, please turn the device off
Check the correct fi t of the Audio cable. Make sure that the jacks
are tightly in the sockets
Increase the volume by turning the VOL volume control (Fig. 1/6)
on the device
Increase the volume by pressing the „ " cursor button (Fig. 2/8)
Check that the headphones are correctly positioned
If you use an amplifi er for Audio output: check whether the
amplifi er is switched on
Check the settings of your DVD-Player
Use the AUDIO button to switch to AC3 sound
The remote control is not pointed towards the DVD-Player
Make sure that the remote control is not further than 5 m away
from the player
Replace the batteries in the remote control
Delete the playlist

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis