Safety Instructions For Installation - LG STYLER S3xERB Serie Bedienungsanleitung

SAFETY INSTRUCTIONS FOR INSTALLATION

• Contact an authorized service center
before installing or relocating the Styler
to avoid injury or product damage when
moving the product.
• When moving the Styler away from
the wall, be careful not to roll over or
damage the power cord.
• The appliance is heavy. Two or more
people are necessary to move and
install the appliance to prevent damage
or injury.
• Prior to use, ensure that you are
connecting this product to a dedicated
grounded electrical outlet rated for
use with this product. It is the user's
responsibility to replace a standard 2-prong
wall outlet with a standard 3-prong wall
outlet.
• Before use, the appliance must be
properly installed as described in this
manual. Electric shock can result if the
appliance is not properly grounded.
• Do not install the Styler where there
may be a danger of the unit falling. The
product is not designed for use on ships
or airplanes. Check with an authorized LG
service center for use under other special
circumstances.
• Do not tamper with controls.
• Install the product where the floor is
firm and level. The product may vibrate
excessively and eventually fall if installed
on an unstable surface, causing damage or
injury.
• Keep the front side protected when
transporting the appliance. Do not truck
from the front. The tempered glass panel
on the front of the appliance may break,
causing damage or injury.
• Properly ground the appliance to
conform with all governing codes and
ordinances. Follow the details in the
installation instructions. Electric shock
can result if the appliance is not properly
grounded.
• Install and store the appliance where
it will not be exposed to temperatures
below freezing or exposed to the
IMPORTANT SAFETY INSTRUCTIONS
weather. Allow the product to warm
to room temperature before use if it
was delivered in winter or at sub-sero
temperature.
• Do not repair or replace any part of
the appliance or attempt any servicing
unless specifically recommended in
the user-maintenance instructions or in
published user-repair instructions that you
understand and have the skills to carry out.
Failure to follow this warning can cause
serious injury, fire, electric shock, or death.
• To reduce the risk of electric shock,
do not install the appliance in humid
spaces such as a bathroom. Failure
to follow this warning can cause death,
serious injury, fire, electric shock, or
product deformation or malfunction.
• Remove all packing items and dispose of
all shipping materials properly. Failure to
do so can result in burns, fire, explosion, or
death.
• Connect to a properly rated, protected,
and sized power circuit to avoid
electrical overload. Improper power
circuits can melt, creating electric shock
and/or fire hazard.
• If the supply cord is
damaged, it must
be replaced by the
manufacturer or its
service agents or
similarly qualified
person in order to avoid
a hazard.
• Keep all packaging from children.
Packaging material can be dangerous for
children. There is a risk of suffocation.
• Do not install near another heat source
such as a stove, oven or heater. Failure
to follow this warning can cause product
deformation, smoke, or fire.
• Do not place candles, smoking
materials, or other flammables on top of
5