OUTRA Extreme 366 Bedienungsanleitung Seite 10

Step 8
Pull the foam down slightly to locate the hole on the curved end of "Upper Frame Tube with Foam"
A .
Attach the "Plastic cap" J and secure with the "Self-Locking Screw" H .
Repeat on all tubes.
J
11
H
A
Step 9
Connect the thread to the nut of "Cable Wire" I by using the "Wrench" N as shown. Then insert
the two groups of Cable Wires into the sleeves of the "Enclosure Netting" L respectively.
Two people should now hold both ends of the wire respectively, so that all the Cable Wires form a
circle. Then connect the two ends of cable Wires together by connecting the thread to the nut
as shown.
I
I
L
N
Now place the Cable Wires with the Enclosure Net on the Trampoline Mat for further assembly.
10
129188_IM.indd 10 5/11/2018 5:26 PM