Sony VPLL-Z4107 Bedienungsanleitung Seite 11

Attaching
1
Turn off the projector, then unplug the
AC power cord from the wall outlet.
Caution
When replacing the lens, your eyes may
be damaged if a strong light accidentally
gets into your eyes. Before replacing the
lens, turn off the projector and then
unplug the AC power cord.
2
Remove the lens cover.
While sliding the LENS COVER
RELEASE buttons inward, pull out the
lens cover until it clicks into place.
3
Turn the contact substrate to the left
facing the front of the lens and insert
the lens to the end while firmly
holding the lens not to drop it.
4
While pressing the slide switch, lower
the lever until it clicks into place.
Lever
5
Attach the lens cover.
Lever
Slide switch
Adjusting the
Projection Lens
Focusing the image
Focus
Press the FOCUS button on the Remote
Commander or the control panel of the
projector once, and adjust with V/v/B/b
on the Lens Focus adjustment screen.
Peripheral focus (Corner Correction)
Press the FOCUS button on the Remote
Commander or the control panel of the
projector twice, and adjust with V/v/B/b
on the Lens Corner Correction adjustment
screen.
Adjusting the image size
(Zoom)
Press the ZOOM button on the Remote
Commander or the control panel of the
projector, and adjust with V/v/B/b.
Adjusting the Projection Lens
11
GB