Maintenance - Extremis alea + Gebrauchsanweisung

alea +
contents
1 x polyester flowerpot cover
1 x galvanized steel frame
1 x flower pot
WARNING!
The shrubs are to be planted in a
separate pot. Consequently, the frame
can be used as a water reservoir. Not all
plants like wet feet though. Always seek
advice from your plant supplier first.

maintenance

GALVANISED FRAME
° Hot dip galvanisation is the most durable
way of protecting metal against rusting. If the
zinc coating is damaged, the exposed metal
can rust. This can easily be touched up with
zinc paint that automatically has the same
colour and is generally available in shops.
° Galvanisation is a thermal process that can
slightly deform the material. Other metal
protection methods do not have this
use
1. In its normal position, the Alea +
polyester flowerpot cover seems to be
floating about 1 cm above the ground.
In this position, the Alea + cannot be
moved.
3. Turn the adjustable foot anti-clockwise,
so you can tip the Alea + to one side and
change direction.
5. When the unit is in the desired spot, carry out the same operations in reverse
order.
disadvantage, but the quality they offer is
insufficient.
POLYESTER
° Clean with a soft cloth and standard
detergents as used to clean the kitchen
with. Never clean the flowerpot cover
with abrasive objects, as the polyester is
vulnerable to scratches.
2. To move the Alea +: Lift the polyester
flowerpot cover about 10 centimetres and
turn it 45°. Then lower it again.
4. Always move the Alea + forward in the
direction of the single wheel, never in the
direction of the adjustable foot. Tilt it to
change direction.
° Superficial scratches can be repaired
with polishing paste, the kind you also
use on your car. We also advise you to
buff the cover afterwards with a high gloss
protector. If the damage is still visible, you
can also take your flowerpot cover to a
local car workshop to have it repainted.
° Avoid cleaning with a high pressure
water jet!
4
english
www.extremis.be