Velleman MICW11D Bedienungsanleitung

MICW11D – WIRELESS VHF TIE CLIP MICROPHONE 184.32MHz
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the MICW11D! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer. The MICW11D is ideal for teachers,
school meetings, speeches, etc.
2. General Guidelines
• Use a 9VDC battery only.
• Do not drop the microphone.
• Protect the units against humidity and heat.
3. Description
1. input
2. volume control
3. power switch
4. LED indicator
5. battery cover
6. MIC sensitivity switch
7. label
8. belt clip
4. Battery Installation
• Open the battery compartment.
• Insert a 9VDC battery respecting the polarity.
• Close the battery compartment.
5. Use
• Switch on the microphone by means of the power switch.
• Turn off the microphone after use so as not to use up the battery.
• Check the LED indicator lights. If the indicator light of the microphone remains lighted, it means that the battery
has no more power. If the indicator light flashes, it means that the microphone is working well.
VDP
- 1 - VELLEMAN