THE DEFAULT CONTROL MODE OF THE SMARTDRIVE MX2+ HAS CHANGED.
IF THIS MODE IS NOT A PROPER FIT, ANOTHER MODE CAN BE SELECTED.
powered on, press the left but-
ton of the PushTracker to turn
power assist ON. You will get a
blue light and a vibration.
To steer while the motor
is driving, lightly grip either
handrim to turn in the direction
Same as you would without SmartDrive.
www.max-mobility.com
www.pushtracker.com
Downloaded from
www.Manualslib.com
SmartDrive MX2
PLEASE READ THE USER'S MANUAL FOR BOTH THE SMARTDRIVE
AND PUSHTRACKER BEFORE OPERATING EITHER DEVICE.
ALL WARNINGS AND SAFETY PRECAUTIONS MUST BE HEEDED.
With your SmartDrive
you would like to go.
manuals search engine
+
PushTracker
Quickstart Guide
IMPORTANT!
In MX2+ mode, a DOUBLE tap
will START UP the motor and
ramp up its speed, and a SINGLE
tap will coast at the current speed.
Pushes do not power.
To turn while the motor is
driving, grip either handrim
firmly to make a sharp turn or to
turn around completely.
Same as you would without SmartDrive.
TO STOP, perform a DOUBLE
tap to deactivate the motor and
then grip both handrims to slow
down the wheelchair.
Other modes will be different.
Be sure to download the
PushTracker App from the Apple
or Google Play Store on your
smartphone.
SDMX2-QSG Rev. C