Identification Plate; Assembly Of Components; Description Of Controls - Smeg CGF01 Gebrauchsanleitung

Description/Assembly/Commands
DESCRIPTION OF THE
APPLIANCE (Fig. A)
1
Motor base
2
Coffee bean container (350 g)
3
Coffee bean container lid
4
Ground coffee container with lid
5
Container support plate
6
START/STOP button
7
Grinding functions selection knob
8
Grinding level adjustment lever
9
Grinder
10 Cleaning brush
11 Centring filter support

IDENTIFICATION PLATE

The identification plate states the technical
data, serial number, and marking. The
identification plate must never be removed.
BEFORE FIRST USE
(Fig. A)
• Unpack the appliance carefully and remove
all packaging materials and promotional
labels.
• Wash all components, except for the motor
base (1) and the grinder (9), with hot water
and normal washing-up liquid. Rinse all
components thoroughly and dry them before
using them.
The grinder must never be
washed and must always be kept
dry. Clean the grinder with the
cleaning brush provided or with
a hard-bristle brush.
Before use, check that all components
are integral and have no cracks.
4 - EN

ASSEMBLY OF COMPONENTS

(Fig. B-C-D)
• Place the container (2) on the motor
b a s e ( 1 ) m a t c h i n g u p t h e t w o
r e f e r e n c e n o t c h e s "
on the left side of the motor body (1).
Next rotate the container (2) clockwise until
the two " " "
• Position the lid (3) on the container (2) and
press it down.
• Position the plate (5) on the motor base (1)
in a way to secure it.
• Open the silicone cap of the ground coffee
container (4) and position it on the plate (5).
• Make sure that the rubber dispenser cone
is centred in the hole of the container lid (4)
as shown in Fig. D.

DESCRIPTION OF CONTROLS

(Fig. E-F)
Grinding adjustment lever (8)
The appliance has a lever (8), which allows
to adjust the level of grinding appropriate to
your use:
FINE
MEDIUM
COARSE
Move the lever to make the indicator (12)
correspond with the desired grinding level.
" "
" indications match.
Fine grinding
Medium grinding
Coarse grinding
"