AM MF041 Bedienungsanleitung

MF041, MF080 Instructions
Washers
Front
Strap
Left
Leg
Back View
1. Attach Back Rest Supports to
inside of each back Leg.
(Note: Front Straps wrap away
from inside Legs. Top end of Back
Rest Support is longer, and the
flat side faces toward the back.)
Secure Back Rest Supports in
place with Bolt, Washers, and
Cap Nuts as shown (fig. 1).
Using a spot of thread lock glue at
ends of bolt, before adding Cap
Nuts, is recommended.
2. Set Bars inside of Seat as
illustrated (fig. 2).
With Back Rest Supports facing
each other, set Bars into Leg
holes. Untie and adjust Seat as
needed to fit.
3. Slip pockets of Back Rest over top
of Back Rest Supports. Buckle
Strap ends together (fig. 3).
4. Buckle Front Strap (fig. 4).
Adjust as needed for desired tilt.
Back Rest
Supports
Bolt
Cap Nuts
Right
Leg
fig. 1
Back Rest Supports
Back Rest Supports
Front
Strap
Back Rest
Back Rest
Strap
Back View
fig. 3
The Netherlands
AM NL
Ambachtsweg 37
NL-3899 AM
Zeewolde
Seat
Bars
Side View
fig. 2
Front Strap
Front View
fig. 4
United States
AM USA
888 Garfield
P.O. Box 21710
Eugene, OR 97402