Using The Special Effects Remote Control Buttons - Samsung HT-FS6200 Bedienungsanleitung

Media Play
RDS DISPLAY
1 2
PTY- PTY SEARCH
4 5
1. Press the PTY SEARCH button while listening to an
FM station.
2. Press the PTY- or PTY+ button until the PTY code
you want appears on the display.
• The display gives you the PTY codes described
to the right.
3. Press the PTY SEARCH button again, while the
PTY code selected in the previous step is still on the
display.
• The centre unit searches 15 preset FM stations,
stops when it finds the one you have selected,
and tunes in that station.
Using the Special Effects Remote
Control Buttons
SOUND EFFECT Function
Lets you select a mode that optimizes the sound.
1. Press the SOUND EFFECT button.
2. Press the ▲▼ buttons to select the desired mode:
DSP or Sound Mode.
3. Press the ◄► buttons to select the desired
sound effect.
K
DSP
MP3 Enhancer  Power Bass  Football  Off
• MP3 Enhancer : Helps enhance your sound
experience (ex. mp3 music). You can upscale your
MP3 level sound (24 kHz, 8bit) to CD level sound
(44.1 kHz, 16bit).
• Power Bass : Increases the volume level of bass
tones and provides thudding sound effects.
• Football : Creates a more dynamic, realistic, stadium
like sound. For listening to football, soccer, and other
sporting events.
• Off : Select for normal listening.
K
Sound Mode
Virtual Sound  Music  News  Drama  Cinema
 Sports  Game  Off
40
|
English
TA
3
3D Sound
PTY+
6
You can enjoy more natural and vivid surround sound
with enriched tones by adjusting the depth of sound
using the level options.
Off  High  Low
| NOTES |
TV Sound
You can listen via Home theatre speakers or TV
Speaker with TV SOUND button.
1.
2.
3.
SOUND
4.
EFFECT
K
K
Connected TV
(HDMI-CEC) not
\
3D Sound is not available in FM mode.
Connect the HDMI cable to TV and Home
cinema. (See page 16)
Set the connected Home cinema and TV to
Anynet+ (HDMI-CEC) On.
Press the TV SOUND button on the remote
control.
Each time you press the TV SOUND button, TV
SOUND ON/OFF flashes shortly on the Display
part on the Front panel, then change to D. IN.
- TV SOUND ON : Output to Home theatre
speakers.
- TV SOUND OFF : Output to Anynet+
connected TV Speaker.
Use in this case:
1) If you want to listen to the sound via home
cinema speaker when you watch a TV.
2) If you want to listen to the sound from the USB
media that plugged to the TV via home cinema
speaker.
TV SOUND ON/OFF support specification
Anynet+
(HDMI-CEC)
Setting
Anynet+ ON
(HDMI-CEC)
supported TV OFF
Anynet+
No operation
supported TV
TV SOUND
TV TV
Sound Sound
ON OFF
O O
O X
O X