Loewe Active Glasses 3D Bedienungsanleitung Seite 8

Start-up
Switching the 3D glasses on/off
In order to switch the glasses on, press the on button (B) at the top right of
the glasses briefly. The LED display flashes in different colours to indicate
the charge status.
Green: remaining operating time > 3 h
Red: remaining operating time < 3 h
Press the ON button for longer than 2 seconds to switch off the 3D glasses.
The LED display will flash red quickly as confirmation.
➠
It can take up to five seconds to synchronise the 3D glasses.
➠
If you are not using the glasses, please switch them off. This will
lengthen the service life of the integrated battery.
Use of the 3D glasses
Put the glasses on after switching them on. If you wear glasses or contact
lenses, you can wear the 3D glasses over your usual visual aid.to the central
axis) and at a suitable distance (see the operating instructions for your
TV set) in front of your 3D ready Loewe TV set to experience the optimum
spatial effects.
When 3D content is being shown, the 3D glasses receive an infrared signal
from the Loewe 3D TV set. The IR sensor is mounted centrally at the front of
the 3D glasses. For this reason, perfect functioning of the 3D glasses is only
possible when looking at the 3D TV set.
➠
The glasses will lose synchronisation if they do not receive any infrared
signal from the TV set for five seconds.
➠
If the 3D glasses do not receive an infrared signal from the 3D TV set
for a period of 2 minutes, they will switch off automatically.
- 8
B
50° 50°
Pressing but-
ton B quickly
switches the
device on.
Pressing and
holding down
button B switch-
es the device off.