Setting And Visualisation Of The Set Point; Locking And Unlocking The Touch Screen - Hayward Pool ENERGYLINE PRO serie Einbau- & Anleitungshandbuch

4. USER INTERFACE (continued)
4.5 Setting and visualisation of the set point (desired water
temperature)
If the button
(While operating or stopped, simply press the button
In Mode "OFF" or Mode "ON"
Press the button
set point you wish.
The setting is made with a precision of 0.5 °C.
It is recommended to never exceed 30°C to avoid alteration of the liners.

4.6 Locking and unlocking the touch screen

Press the button
To unlock, press
is not visible on the screen, press
to display the set point, then press
for 5 s until it beeps and this symbol appears
for 5 s until it beeps and this symbol disappears
briefly.
to view the set point)
or to set the
.
.
15