Inhaltsverzeichnis
Werbung
Mounting instructions
MF6F does not need any special mechanical or electrical mounting contrivan-
ce. It is designed to be mounted on DIN rail 35mm.
Working is not affected, in any way, by the mounting position.
Before mounting NEMO it is necessary to verify the type of connection (direct
or by external voltage and current transformers) as well as the three-phase
line configuration (3 or 4 wires) on which it has to be connected.
Please make sure that data on the label correspond to the real network ones.
In the wiring scrupulously respect the wiring diagram; an error in connection
unavoidably leads to wrong measurements or damages to the meter.
Werbung
Inhaltsverzeichnis
