Pre-Set Function - M-system MCM-400 Bedienungsanleitung

5) Press "START/+30SEC./CONFIRM" to confirm;
6) Turn " " to adjust the cooking time of 7 minutes;
7) Press "START/+30SEC./CONFIRM" to start cooking.

8. Pre-set Function

1) Set the clock first. (Consult the instruction of clock setting.)
2) Input the cooking program. T
be set in preset function.Auto menu can be set single stage only.
Example: if you want to cook with 80% microwave power for 7 minutes.
a. Press"MICROWAVE" once;
b. Press " MICROWAVE" for times or turn "
"P80" display;
c. Press "START/+30SEC./CONFIRM" to confirm;
d. Turn " " to adjust the cooking time of 7 minutes;
After the above steps, please do not press " START/+30SEC./CONFIRM ". Then
do as following:
3) Press " CLOCK/PRE-SET ", current time displays and the hour figures flash.
4) Turn " " to adjust the hour figures, the input time should be within 0--23(24-hour)
or 1--12(12-hour).
5) Press " CLOCK/PRE-SET ", the minute figures will flash.
6) Turn " " to adjust the minute figures, the input time should be within 0--59.
7) Press " START/+30SEC./CONFIRM " to finish setting. ":" will light, buzzer will
ring twice when the time arrives, then cooking will start automatically.
Note: clock must be set first. Otherwise,pre-set function will not work.
9. Auto Menu
1) In waiting state, turn "
and "A1","A2","A3"...."A10" will be displayed.
2) Press "START/ +30 SEC./CONFIRM" to confirm the menu you need.
3) Turn " " to choose the weight of menu,and "g" indicator will light.
4) Press "START/ +30 SEC./CONFIRM" to start cooking.
When you choose A8 cake, please do not put the cake into the oven at the begining. The
oven needs to be preheated to 180 degree first. After sevarel minutes, the buzzer sounds
twice to remind you to put the cake into the oven. After putting the cake in the oven, please
press "Start/+30Sec./Confirm" again. The timer will count down, and the cake will be
cooked perfectly.
wo stages can be set at most. Defrosting should not
" to choose 80% microwave power till
" right to choose the function wanted,
EN-12