Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Xwheel Structure
Your Xwheel is packed in two-layer high quality cardboard boxes and styro foam for the protection during transporta-
tion. Please keep them well in case you need to send back the product for any service or repair in future.
Content of Delivery:
•
The Xwheel
•
Battery Charger and Power Cord
•
Learning Band
•
User's Guide and Manual
A.
Power On/Off Switch
B.
Power Indicator
C.
Charging Port
D.
Front Light & Signal Light Switch
E.
Signal Light
F.
Front Light
G.
Leg Pad
H.
Wheel
I.
Pedal
J.
Pedal Gear
K.
Reset Button
K
B
C
D
E
G
尾灯
H
I
J
3-
EN
a. Charging the Battery
Your Xwheel comes with a built-in lithium-ion battery pack. Before using the Xwheel for the first time, you must fully
charge the battery. Please make sure you charge the battery in a dry location.
•
Plug one end of the power cord into the charging port on the Xwheel. Plug the other end into a grounded AC
outlet. The red charging light on the charger unit will turn on.
•
The charger may take up to 1.5 hours to complete its charge. The red light on the charger will turn green once it is
finished.
b. Power Indicators
The power indciators are made of LED module, which indicates the battery. There are in total 5 green LED blocks and
indicate as below:
F
•
All 5 green LED lighting up indicates 85% or above of battery power.
•
Only 1 green LED left indicates 6% of battery power left and that means you should charge as soon as possible.
•
Please note that when temperature is below 10 °C, the riding distance will be reduced as battery will be releasing
less power than in a normal temperature.
c. Beeping Alert
•
Power on: short beeping once
•
Xwheel tips 45 degrees or above to one side: long beeping.
•
Low Battery: fast beeping
•
Overspeed: slow beeping
•
Alert to charge battery: beeping 3 times every 5 seconds.
Getting Ready
4
-EN
Werbung
Inhaltsverzeichnis
