Ec Declarations Of Conformity - ryan 744844G Bedienungsanleitung

The Undersigned Manufacturer:
Schiller Grounds Care, Inc.
One Bob-Cat Lane
Johnson Creek, WI 53038
EU Authorized Representative:
Earlsmere Limited
Unit 18 Valley Road
Station Road Industrial Estate
Wombwell, Barnsley, South Yorkshire, S73 OBS UK
Declare that the machine Described Below:
Make & Type: ...................................... Ryan, Jr. Sodcutter
Category: ............................................. Sodcutter
Series: ................................................. 744844G, 744845G
Engine: ................................................ Briggs & Stratton
Type:.................................................... 12H3320144B8
Speed: ................................................. 3600 R.P.M
Net Installed Power: ............................ 4.8 KW (6.5hp)
Operation Width: ................................. 302 mm (11.75") for 744844G
............................................................ 457 mm (18") for 744845G
Complies with the provisions of the following European Directive, Amendments, and the Regulations
transposing it into national law:
Directives/Harmonized Standards
Machinery Directive ............................. .....................2006/42/EC
EMC Directive: .................................... .....................2004/108/EC
Noise in the Environment Directive ..... .....................2000/14/EC
Vibration Directive ............................... .....................2002/44/EC
Non Road Emissions ........................... .....................2002/88/EC
Sound: Sound levels were determined in accordance with Directives 2000/14/EC, 2006/42/EC and
standard ISO 11094
Guaranteed Sound Power Level ......... 105dB
Operator Ear........................................ 90dB
Vibration:
Hand/arm vibration was measured at the right and left operator handles per ISO 5349-1-2001 and
ISO 5349-2-2001. Levels were calculated using ISO/DIS 5395-1, in accordance with 2002/44/EC.
Only the highest of the left and right readings is given.
Guaranteed Vibration Level ................. 9 m/s²
Intended Use:
This machine is for cutting sod in grass areas grown for the purpose of harvesting sod, and
general sod removal. It is intended for use on flat areas and small slopes. Loss of control may
result on steeper slopes. It is not intended for use in rocky areas.
20
EC Declaration of Conformity
4164673 REV A
Chuck Clark
Director of Operations
Date: February 1, 2010
Jim White
Managing Director
Date: February 1, 2010