Playback Mode; Deleting Files; Connecting To Personal Computer (Pc) - Parkcity GO 10 PRO Benutzerhandbuch

ENG
GO 10 PRO
Note: If you do not stop recording, the video recording will continue until the battery is discharged; at the
same time, if the camera has not enough space, it will start deleting files that have been recorded
previously.
3. To start video recording, press the unlocking button in the upper part of the camera body or simply touch
the centre of the screen.
4. To stop the recording, simply press on the centre of the screen or locking button.

Playback mode

1. Switch on the camera.
2. Press the video playback camera in the bottom right corner of the screen to view recorded photo
and video files.
3. Press arrows icons to select a file to be viewed.
Note: during playback, in the left upper corner of the screen the following marks will be displayed: JPG
(mark for photo) or AVI (mark for video file).
5. After the file to be viewed is selected, press the playback button at the bottom of the screen; the camera
will start video playback.
6. During video playback you can stop the playback, play it in slow or fast mode - use pause or rewind icon
(arrows) at the bottom of the screen.

Deleting files

1. In the playback mode, there is a bin icon at the bottom of the screen for recorded files.
2. If you want to delete a particular video or photo file, select it using arrows, and press the bin icon.
3. After the bin icon is pressed, the words: "Delete this file?" will appear.
4. Click "Yes" if you want to delete this file, or "No" if you do not want to delete this file.

Connecting to personal computer (PC)

When the device is connected to the PC via USB cable, the following will appear on the screen: "USB
connection...", the computer's operating system will detect the device as a removable disk. A removable
disk icon will appear in the "My computer" window. Path of the directory where the files in the camera are
stored is as follows: I:\DCIM\100MEDIA (by default, the camera is namesd "Disk I"). Videos recorded in the
auto video mode are stored in: I:\DCIM\RECORDER. If you need to edit the files on the camera, you can do
it using a PC directly in the camera, without copying them to the PC.
10