ZOSI HD POE NVR Installationsanleitung Seite 8

Click "ok" to complete device adding.
Click "PreView" on menu, and double click
the device you want to watch on list, the
image will show up.
4. Record video
REC
The system may not include Hard Disk depending on the kit you selected. This system works with most 3.5" SATA
Hard Disk or 2.5" SATA Hard Disk.
1. Install a Hard Disk
(if your system has preinstalled Hard Disk, please skip this step)
① Unplug your DVR from power, unscrew and remove the top cover.
② Connect the SATA power and data cables from the DVR to the corresponding ports on your Hard Disk (as shown).
③ Place the Hard Disk into the DVR. Any cable should cross up over the Hard Disk.
④ Holding the Hard Disk and the DVR, gently turn it over and line up the holes on the Hard Disk with the holes on the DVR.
Using a Phillips screwdriver, screw the provided screws into the holes. Assemble the cover.
Note:
After installing a Hard Disk, you need to first format the Hard Disk before recording.
Right click the mouse > go to Main Menu > Disk Management > Select the Hard Disk > Click Format > Apply.
2. Record video
Right click mouse > Go to Main Menu > Setup > Record
You shall see the record settings for all channels. Change the record setting according to your preference and apply the
changes.
① ②
③ ④
7