Motion Detection - ZOSI HD POE NVR Installationsanleitung

6. Motion Detection

Set motion Detection,DVR will record only when motion or movement is detected.
Right click mouse > Main Menu > Setup > Alarm > Motion > Motion detection.
The system records when motion is detected by the camera.
Select Camera.
Tick the Channel you want to record on motion detection.
Holding Time. Set recording time length after motion stops.
Trigger. Multi-channels can be set to record when detecting the motion by one of cameras.For example,when camera 1
detects motion,camera 2 and camera 3 can be triggered to record as well.
Area.
It is allowed to set sensitivity area of camera viewing range.
Click STAR to make the whole viewing range as sensitivity area;
Click Trash Box to remove sensitivity area;
Click and drag mouse to draw or erase the sensitivity area.
Click to save setting
As Color and luminance is important for sensitivity, so it's necessary to adjust its value at specific conditions. The default
value is 4 while value range is from 1 to 8.
Right click mouse to show or hide control menu at screen bottom.
Test the setting by moving something or some one walk through grid area within camera viewing range. If DVR detects
movement within grid area, a yellow hunanoid figure would be presented in the screen. The grid could not cover flag, trees or
some other flow objects in the wind to avoid false alerts.
An icon is shown when motion is detected.
Click to exit
9